一，保持設備干凈無雜物，衛生工作做到位。

1、 Keep the equipment clean and free of debris, and ensure proper hygiene.

二，確保電路暢通，無缺項，零線火線不短路，接線良好，電器件完好無損，經常檢查電器路。

2、 Ensure that the circuit is unobstructed, there are no missing items, the neutral and live wires are not short circuited, the wiring is good, and the electrical components are intact and undamaged. Regularly inspect the electrical circuits.

三，開齒刀盤 壓刀盤正常使用，無缺損無變形。

3、 The toothed cutterhead and pressure cutterhead are used normally, without any defects or deformation.

四，按操作規程使用機器設備，切勿違規使用。

4、 Use the machinery and equipment according to the operating procedures, and do not use them in violation of regulations.

五，機械運動部分經常加注潤滑油，避免在長期無潤滑的狀態下工作。

5、 The mechanical moving parts are often lubricated to avoid working in a long-term non lubricated state.

六，日常維護、定期維護、定期檢查和精度檢查綜合保障維護。

6、 Daily maintenance, regular maintenance, regular inspections, and precision checks are comprehensively guaranteed for maintenance.

七，整齊、清潔、堅固、潤滑、防腐、安全等的作業內容、作業方法、使用的工器具及材料、達到的標準及注意事項。

7、 Work content, methods, tools and materials used, standards achieved, and precautions for neatness, cleanliness, sturdiness, lubrication, corrosion prevention, safety, etc.

八，發現問題及時解決，切勿帶病工作使用機器。

8、 Promptly resolve any issues and do not use the machine while working with illness.

九，氣路部分確保無漏氣，氣路暢通無阻塞，氣路系統時刻保持潤滑無異物。

9、 Ensure that there is no air leakage in the air circuit, the air circuit is unobstructed, and the air system always maintains lubrication without foreign objects.